Accurate Technology ProScale Manuel d'utilisateur télécharger pdf (Page 30)

Accurate Technology ProScale Page 30 of 48

Pr8 – Automatic Power Off [0 to 60] Default = 15

Sets the amount of time in ‘minutes without activity’ before the

Display automatically turns off.

0 = Disables Automatic Power Off.

ReadHead motion or ON/OFF key will “wake-up” the Display and

reset the timer.

Pr9 – Auxiliary Keys Enable/Disable [0..7]

0 = ABS/INC, MON and HOLD Disabled

1 = ABS/INC Key Enabled

2 = MON Key Enabled

4 = HOLD Key Enabled

7 = All Keys Enabled

To enable keys, add up combination of key values. A value of 2

enables only the MON key. A value of 7 enables all 3 keys.

Pr10 – Offset Addition Enable [0, 1]

0 = Offset Addition Disabled.

1 = Offset Addition Enabled.

SEE ALSO Pr11, Pr12, Pr13.

Pr11 – Offset Addition 2

[-999.999 to 999.999in] or [-9999.99 to 9999.99mm]

Default = 1.000 in. (25.40mm)

When offset 2 is selected (see Section 4: OFFSET ADDITION),

this value is added to the current ABS position.

Only active if Pr10 is set to 1. Default is set in Inches.

Pr12 – Offset Addition 3

[-999.999 to 999.999in] or [-9999.99 to 9999.99mm]

Default= 1.500 in. (38.10mm)

When offset 3 is selected (see Section 4: OFFSET ADDITION),

this value is added to the current ABS position and displayed.

Only active if Pr10 is set to 1. Default is set in Inches.

Pr13 – Offset Addition 4

[-999.999 to 999.999in] or [-9999.99 to 9999.99mm]

Default= 2.000 in. (50.80mm)

When offset 4 is selected (see Section 4: OFFSET ADDITION),

this value is added to the current ABS position and displayed.

Only active if Pr10 is set to 1. Default is set in Inches.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 47 48

Pas de commentaire

Accurate Technology ProScale Manuel d'utilisateur Page 30